CX200 is a small turning-milling compound machine tool. Through the dual-power spindle structure (milling spindle and turning spindle) and an 8-station automatic tool changer (4 turning tool stations, 2 milling tool stations, 2 drilling center hole stations), it integrates multiple functions such as turning, milling, drilling, and tapping, achieving multi-process machining in a single setup. It features a small size, quiet operation, light weight, easy handling (with movable casters at the bottom of the machine); stable performance, low failure rate, low maintenance cost, and good rigidity. It is equipped with an industrial-grade panel CNC system, XYZ three-axis with servo motors, uses a single-phase 220V or AC110V voltage, includes an interlock protection device, has a cast iron inclined bed structure, equipped with high-precision linear guides and ball screws, and comes with a workpiece coolant circulation system.
Servo motor drive, high speed, precision, low noise, 8-station automatic tool change. The Y-axis servo motor drives the power tool spindle to move along the Y-axis through a ball screw, and the configured power motor can perform processing of complex parts such as drilling, milling, turning, boring, and tapping. It uses servo motor indexing, bidirectional nearby tool change, with fast tool change speed and high efficiency.
The inclined bed design allows the guide rail plane to form a 30° angle with the horizontal plane, increasing the X-axis travel under the same guide rail width, accommodating more tool positions, and enhancing machining flexibility. The compact inclined bed design reduces the machine's footprint. A three-jaw chuck or ER40 collet can be selected to hold the workpiece, with a workpiece cooling system included.
Industrial CNC system,more stable and more durable, and operate more simple， while the integrated handwheel trial cutting function allows you to verify the accuracy of your program and positioning before committing to the final machining process.
Selection of high-precision linear guide and ballscrews,automatic lubric sation system,protect the rail life,experience the pinnacle of precision, reliability.
The bed body is made of high-quality cast materials, offering better rigidity and greater stability; it has excellent vibration damping performance, good dimensional stability, is not easily deformed, which is conducive to maintaining the machine tool's precision over the long term, and ensures the high performance and long-term stability of the machine tool.
Using a 220-volt or 110-volt single-phase power supply and a servo drive system. A reasonable circuit layout reduces the signal-to-noise ratio degradation caused by signal transmission attenuation, thereby ensuring correct and reliable signal transmission.
Technical parameters |
|
Repeatability accuracy |
0.01mm |
Positioning accuracy |
0.02mm |
Turning diameter over bed(max) |
300mm |
Spindle through-hole |
25mm |
XYZ axis travel |
140/80/180mm |
XYZ axis motor |
XY axis 400W servo motor;Z axis 600W servo motor |
XYZ max moving speed |
4000mm/min |
XYZ max feeding speed |
3000mm/min |
Automatic tool change system(ATC) |
8 tools(4 turning tools,2 milling tools ,2 drilling center hole tools) |
Machine bed inclination |
30° Slant bed |
Clamping method |
100mm Three-jaw chuck or ER40 collet chuck with flange |
guide rail |
15mm High-precision linear guide |
Transmission |
16mm Ball screws (Grade accuracy: C5) |
Lathe tool dimension |
10×10mm |
Mill spindle taper |
ER16 |
Tool DIA. range(max) |
10mm |
Rigid tapping(max) |
M6 |
Lathe spindle power/speed |
1.5kw /2000rpm |
Y-axis power turret power/speed |
0.75kw/2000rpm,optional 1kw |
Control system |
YORNEW 980Tc turning CNC system |
Power |
220VAC/110VAC |
Overall dimension |
1100×730×1500mm |
Weight(NW/GW) |
330/380kg |
Technical parameters |
|
Repeatability accuracy |
0.01mm |
Positioning accuracy |
0.02mm |
Turning diameter over bed(max) |
300mm |
Spindle through-hole |
25mm |
XYZ axis travel |
140/80/180mm |
XYZ axis motor |
XY axis 400W servo motor;Z axis 600W servo motor |
XYZ max moving speed |
4000mm/min |
XYZ max feeding speed |
3000mm/min |
Automatic tool change system(ATC) |
8 tools(4 turning tools,2 milling tools ,2 drilling center hole tools) |
Machine bed inclination |
30° Slant bed |
Clamping method |
100mm Three-jaw chuck or ER40 collet chuck with flange |
guide rail |
15mm High-precision linear guide |
Transmission |
16mm Ball screws (Grade accuracy: C5) |
Lathe tool dimension |
10×10mm |
Mill spindle taper |
ER16 |
Tool DIA. range(max) |
10mm |
Rigid tapping(max) |
M6 |
Lathe spindle power/speed |
1.5kw /2000rpm |
Y-axis power turret power/speed |
0.75kw/2000rpm,optional 1kw |
Control system |
YORNEW 980Tc turning CNC system |
Power |
220VAC/110VAC |
Overall dimension |
1100×730×1500mm |
Weight(NW/GW) |
330/380kg |
CX200 Small turning-milling compound machine tool Video
We Provide high performance manufacturing solutions at a price small manufacturers can afford.
Please Click on the download for catalog
